WHAT IS BARRELCOOL?

DO YOU WANT A DEVICE THAT CAN CUT THE COOLING TIME IN HALF ON YOUR HOT BARREL? BARRELCOOL IS A PATENT PENDING, EMPTY CHAMBER FLAG AND BARREL COOLING DEVICE IN ONE. IT IS USED TO COOL THE BARREL DURING CEASE FIRES AND BETWEEN STRINGS OF FIRE WHILE INDICATING TO EVERYONE AROUND THAT YOUR FIREARM IS IN A SAFE CONDITION. INSERT BARRELCOOL INTO THE CHAMBER OF YOUR RIFLE AND TURN IT ON. BARRELCOOL WILL FORCE AIR INTO THE BORE OF THE RIFLE, COOLING THE BARREL FROM THE INSIDE, OUT.

HOW WELL DOES BARRELCOOL WORK?

Each barrel will cool differently based on the caliber, diameter of the barrel and the general conditions where the rifle is being cooled.   What BarrelCool does well is it starts to cool the barrel from the bore of the rifle, specifically the throat area of the barrel.  BarrelCool draws in ambient air and redirects it into the bore of the rifle.  

 

In most cases, waiting times to cool a barrel with BarrelCool versus without is nearly 1/2 the time.  This has been shown through multiple user feedback.  Visit our Product Review section to see what many others have seen experienced with BarrelCool. 

 

The graph below shows the outside barrel temperature of a 1.25" diameter, 32" barrel.  The barrel was heated from the inside until the outside barrel temperature reached ~140 degrees.  Getting the outside barrel temperature down to 105 degrees took roughly half the time versus leaving the barrel alone.   Bear in mind, this is a 1.25" diameter barrel, which is most likely the thickest barrel you will see out on the range.  Thinner contour barrels will see better results than this.